unisonic technologies co., ltd mbr10100c diode www.unisonic.com.tw 1 of 1 copyright ? 2011 unisonic technologies co., ltd qw-r601-015.ca schottky barrier rectifier ? features * 10 amps total (5 amps per diode leg) * guard ring for transient protection * low forward voltage drop * high surge capability * low power loss/high efficiency ? symbol ? ordering information ordering number package pin assignment packing lead free halogen free 1 2 3 mbr10100cl-ta3-t MBR10100CG-TA3-T to-220 a k a tube mbr10100cl-tf3-t mbr10100cg-tf3-t to-220f a k a tube mbr10100cl-tq2-t mbr10100cg-tq2-t to-263 a k a tube mbr10100cl-tq2-r mbr10100cg-tq2-r to-263 a k a tape reel note: pin assignment: a: anode k: cathode mbr10100cl-ta3-t (1)packing type (2)package type (3)lead free (1) t: tube, r: tape reel (2) ta3: to-220, tf3: to-220f, tq2: to-263 (3) g: halogen free, l: lead free
mbr10100c diode unisonic technologies co., ltd 2 of 2 www.unisonic.com.tw qw-r601-015.ca ? electrical characteristics (t a =25 , unless otherwise specified) parameter symbol ratings unit maximum repetitive peak reverse voltage v rrm 100 v maximum non-repetitive peak reverse voltage v rm 100 v maximum dc blocking voltage v r 100 v average forward rectified output current per leg i out 5 a total device 10 a forward voltage i f =5a, t c =25 v f 0.85 v i f =10a, t c =25 0.95 v maximum dc reverse current@ v r =100v i r 0.1 ma junction capacitance (note 1) c j 300 pf operating temperature t j 150 storage temperature t stg -55 ~ +150 note.1: applied v r = 4.0v and f = 1.0mhz. utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
